Aktualizacja systemu

Witam. Pojawiła się aktualizacja systemu dla pc3K i pc3A
Aktualnie (w pc3K) mam 2.21, czy orientuje się ktoś co wnosi nowa wersja???

OS Version 2.45 Release Notes
CAUTIONS: Content created with v2 is not backwards compatible to older v1 software versions (exception = .MID files). Content created with a PC3K older than v2 is of course forward compatible with v2.

MULTI MODE:

Fixes/Improvements:

Some object names have been changed.
PROGRAM MODE:

Fixes/Improvements:

Some object names have been changed.
Past Release Notes
OS Version 2.41 - 4/22/15
SETUP MODE:

Fixes/Improvements:

When the ribbon controller is set to use negative scaling, it will now properly spring back to the center value.
PROGRAM MODE:

Fixes/Improvements:

Fix for issue introduced in V2.40 where FUN 'a*10^b' would always output 0.
When the ribbon controller is set to use negative scaling, it will now properly spring back to the center value.
OS Version 2.40 - 3/13/15
SETUP MODE:

Features:

Support for the German D Grand EXP added.
Fixes/Improvements:

Sostenuto Pedal: restriking notes that are already latched by the Sost Pedal will now be retriggered/sustained again.
PROGRAM MODE:

Features:

Support for the German D Grand EXP added.
Fixes/Improvements:

EditProg:LAYER - Bend mode 'Key'; Releasing the sustain pedal while a bent 'latched' note is still sounding will no longer cause the pitch to jump to the position of the pitch wheel.
EditProgROGFX - Editing an FX Chain by removing an FX box no longer results in unexpected FX box arrangements.
EditProgROGFX - FX Alg (Gate+TubeAmp) adjusted to reduce popping noises that could occur when changing between programs that employed this Alg in their FX Chain.
EditProg:KEMAP/EditSample - When dealing with multi-velocity keymaps, exiting Sample Mode now correctly maintains the sample assignment.
Sostenuto Pedal: restriking notes that are already latched by the Sost Pedal will now be retriggered/sustained again.
Improved handling of MIDI CC126 (Mono On).
A fix was implemented for clicks that could occur using certain DSP in cascade mode.
"Expression" (cc11) now has a greater negative range, achieving closer to complete silence at the lowest setting level (KB3 swell behavior is unaffected by this change).
The state of the SW and Arp buttons are now properly initialized at start-up.
QA MODE:

Fixes/Improvements:

When no entry is selected (on entrance), the bank buttons can no longer mute the current zone.
MIDI MODE:

Fixes/Improvements:

PrgChg page - the proper order or Bank MSB/LSB is now transmitted.
CHANLS - Changes will now be included in the saved master table upon exit of the CHANLS page.
GENERAL:

Fixes/Improvements:

Improved stability of external editor control.

Fajnie, że jeszcze wychodzą aktualizacje na pc3k

Fajnie, że jeszcze wychodzą aktualizacje na pc3k

W sumie czemu nie, skoro PC3K/A to nadal aktualne i pełnowartościowe workstation. Na PC3 już na pewno nie będzie uaktualnień ale co Ja tam mam rozszerzać jeśli na pokładzie mam już Kore64 i Barb Full Pack.